P Ponk O470-50
Experienced in the installation of the P Ponk O470-50 engine upgarde from 1953 Cessna 180 on up.
Similar Posts
Replaceable Horizontal leading edge STC for Cessna 180, Cessna 185 and Cessna 182
This is a great STC for those who fly the backcountry or fly off field. This kit incorporates a .040 leading edge that is replaceable, it replaces the .020 original skin and also replaces the upper and lower skins with one piece. If you have ever noticed a Cessna 180 or 185 that is used like…
LP Aero one piece windshield
Removal of old windshield and installation of new LP Aero one-piece windshield also the fabrication of new V Brace. I bought a new V Brace but it did not fit so I made my own. The older 180 glare shield hight is a bit different than later models, also the top of the glare shield has a seam that…
Selkirk center tunnel cover
Selkirk tunnel install
Power Flow Specialties Dealer
Power Flow Specialties is still a ways out on building the first exhaust and I can only imagine that there will be issues to iron out but I have jumped in line with a deposit and look forward to installing it on my 1955 180. Going to get out and start collecting numbers so when…
Whipaire wing tip extensions
The owner is planning on installing a set of amphibious floats on this 206 and decided to add the wing tip extensions. Unlike the Wing X these have not spar to install and give you no gross weight increase but the nice thing about the Whipaire is that you can take them off. Not to…